Effect of Base Material Variations on the Characteristics of Briquettes from Coconut Shell Charcoal and Corncob Mixtures

Melenia Melenia, Sukainil Ahzan, Dwi Pangga

Abstract


This study investigates the effects of varying base materials, specifically coconut shell charcoal (ATK) and corncob charcoal (ABJ), on the characteristics of biobriquettes. The research employs an experimental method, analyzing the impact of different ATK and ABJ proportions on calorific value, ash content, moisture content, density, and combustion rate. The biobriquettes were produced by mixing coconut shell and corncob charcoal with 10% tapioca starch adhesive, molded into cubes, and dried. The results show that increasing the ATK proportion improves the calorific value, with the highest value of 10,640 calories in briquettes with 90% ATK. In contrast, higher ABJ content results in faster combustion rates but lower energy efficiency, with the lowest calorific value of 6,424 calories in briquettes containing 90% ABJ. The study also highlights that all biobriquettes meet Indonesian National Standards (SNI) for moisture content and calorific value, although only the 90% ATK sample meets the ash content standard. These findings suggest that coconut shell charcoal is a superior biomass material for producing high-performance biobriquettes, with a 90% ATK and 10% adhesive combination yielding the best overall results for sustainable energy applications.


Keywords


Biobriquettes; Coconut shell charcoal; Corncob charcoal; Calorific value; Combustion rate.

Full Text:

PDF

References


Aljarwi, M. A., Pangga, D., & Ahzan, S. (2020). Uji Laju Pembakaran dan Nilai Kalor Briket Wafer Sekam Padi dengan Variasi Tekanan. ORBITA: Jurnal Kajian, Inovasi dan Aplikasi Pendidikan Fisika, 6(2), Article 2. https://doi.org/10.31764/orbita.v6i2.2645

Arbi, Y., Aidha, E. R., & Deflianti, L. (2018). Analisis Nilai Kalori Briket Tempurung Kelapa sebagai Bahan Bakar Alternatif Di Kecamatan Sipora Utara Kabupaten Mentawai. Jurnal Pendidikan Teknologi Kejuruan, 1(3), 119–123. https://doi.org/10.24036/jptk.v1i3.2123

Harlina, A. C., Ropiudin, R., & Ritonga, A. M. (2021). Journal of Agricultural and Biosystem Engineering Research, 2(2), 19.

https://doi.org/10.20884/1.jaber.2021.2.2.4984

Hidayat;, F. R. (2022). Skripsi Karakteristik Nilai Kalor, Laju Pembakaran dan Kadar Air Briket Limbah Kulit Singkong dan Bonggol Jagung (Magelang). Universitas Tidar. //repositori.untidar.ac.id%2Findex.php%3Fp%3Dshow_detail%26id%

Iriany, M., Firman, A., Sibarani, S. & Irvan, I. (2016). Pengaruh Perbandingan Massa Eceng Gondok dan Tempurung Kelapa serta Kadar Perekat Tapioka terhadap Karakteristik Briket. Jurnal Teknik Kimia USU, 5(1), 20–26. https://doi.org/10.32734/jtk.v5i1.1520

Jannah, B. L., Pangga, D., & Ahzan, S. (2022). Pengaruh Jenis dan Persentase Bahan Perekat Biobriket Berbahan Dasar Kulit Durian terhadap Nilai Kalor dan Laju Pembakaran. Lensa: Jurnal Kependidikan Fisika, 10(1), 16–23. https://doi.org/10.33394/j-lkf.v10i1.5293

Khusaini, R., & Rahman, J. (2024). Pengaruh Kerapatan Briket Campuran Tempurung Kelapa dan Bonggol Jagung terhadap Kinerja Kompor Biomassa. Jurnal Teknik Mesin Indonesia, 19(1), Article 1. https://doi.org/10.36289/jtmi.v19i1.465

Manisi, L. l., & Kadir, A. (2019). Pengaruh Variasi Komposisi terhadap Karakteristik Briket Campuran Sekam Padi dan Kulit Jambu Mete. 4.

Nasruddin, & Affandy, R. (2011). Karakteristik Briket dari Tongkol Jagung dengan Perekat Tetes Tebu dan Kanji. Jurnal Dinamika Penelitian Industri, 22(2), Article 2. https://doi.org/10.28959/jdpi.v22i2.541

Pangga, D., Ahzan, S., Habibi, H., Wijaya, A. H. P., & Utami, L. S. (2021). Analisis Nilai Kalor dan Laju Pembakaran Briket Tongkol Jagung sebagai Sumber Energi Alternatif. Orbita: Jurnal Pendidikan Dan Ilmu Fisika, 7(2), 382–386. https://doi.org/10.31764/orbita.v7i2.5552

Pangga, D., Safitri, B. R. A., Sani, A. A., & Prayogi, S. (2022). Pengaruh Variasi Bahan Perekat Biobriket Berbahan Dasar Tongkol Jagung terhadap Nilai Kalor dan Laju Pembakaran. ORBITA: Jurnal Pendidikan Dan Ilmu Fisika, 8(1), 175–180. https://doi.org/10.31764/orbita.v8i1.7934

Qistina, I., Sukandar, D., & Trilaksono, T. (2016). Kajian Kualitas Briket Biomassa dari Sekam Padi dan Tempurung Kelapa. Jurnal Kimia VALENSI, 0(0), 136–142. https://doi.org/10.15408/jkv.v0i0.4054

Rumiyanti, L., Irnanda, A., & Hendronursito, Y. (2018). Analisis Proksimat pada Briket Arang Limbah Pertanian. Spektra: Jurnal Fisika Dan Aplikasinya, 3(1), Article 1.

Sakdiah, N. H., Pangga, D., & Ahzan, S. (2023). Effect of Biobriquette Composition Made from Peanut Shells and Wood Powder on Calorific Value and Burning Rate. Jurnal Penelitian Dan Pembelajaran Fisika Indonesia, 5(2), Article 2. https://doi.org/10.29303/jppfi.v5i2.246

Sarwono, E., Adinegoro, M. B., & Widarti, B. N. (2018). Pengaruh Variasi Komposisi Batang, Pelepah, dan Daun Tanaman Kelapa Sawit terhadap Kualitas Briket Bioarang. Jurnal Teknologi Lingkungan UNMUL, 2(1), Article 1. https://doi.org/10.30872/jtlunmul.v2i1.1575

Stiawan, R., Ahzan, S., & Pangga, D. (2023). Pengaruh Variasi Bahan Perekat Biobriket Berbahan Dasar Kulit Kacang Tanah terhadap Nilai Kalor dan Laju Pembakaran. Jurnal Ilmiah IKIP Mataram, 9(1), 20–26.

Sukarti, S., Pangga, D., & Ahzan, S. (2023). Pengaruh Persentasi Perekat Briket Berbahan Dasar Tempurung Kelapa terhadap Nilai Kalor dan Laju Pembakaran. Jurnal Ilmiah IKIP Mataram, 10(1), 25–31.

Sukartono, S., & Utomo, W. H. (2012). Peranan Biochar sebagai Pembenah Tanah pada Pertanaman Jagung di Tanah Lempung Berpasir (Sandy Loam) Semiarid Tropis Lombok Utara. BUANA SAINS, 12(1), 91–98. https://doi.org/10.33366/bs.v12i1.155

Sulistyaningkarti, L., & Utami, B. (2017). Making Charcoal Briquettes from Corncobs Organic Waste using Variation of Type and Percentage of Adhesives. JKPK (Jurnal Kimia dan Pendidikan Kimia), 2(1), 43. https://doi.org/10.20961/jkpk.v2i1.8518

Wicaksono, W. R., & Nurhatika, S. (2019). Variasi Komposisi Bahan pada Pembuatan Briket Cangkang Kelapa Sawit (Elaeis guineensis) dan Limbah Biji Kelor (Moringa oleifera). Jurnal Sains dan Seni ITS, 7(2), Article 2. https://doi.org/10.12962/j23373520.v7i2.37231




DOI: https://doi.org/10.33394/j-lkf.v12i2.13305

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons License
Lensa: Jurnal Kependidikan Fisika is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.