The Effect of Different Liquid on Temperature Uniformity and Stability in Microbath 7102

Waslina Rangkuti, Kerista Tarigan, Syahrul Humaidi, Marhaposan Situmorang, Erna Frida, Yahya Darmawan

Abstract


Microbath Fluke Type 7102 is used for thermometer calibration. In the calibration process, Microbath uses liquid media as heat conductor. Liquid media in Microbath during the calibration process there is a value of uniformity and temperature stability. The value of temperature uniformity and stability is an influential component in determining the value of measurement uncertainty (U95). The smaller the U95 value, the better the calibration results. This is a factor in this study to analyse the uniformity and temperature stability of liquid types of Water, Methanol and Glycol. The uniformity test method is carried out using 5 (five) point measurements, where the reference point is in the middle. The stability test method uses the measurement of one reference point. Uniformity and stability values are connected to determine the uncertainty of measurement value using the GUM (Guide to the expression of Uncertainty in Measurement) method. The analysis showed that Methanol is more homogeneous than Glycol and Water, with values of 0.0855 ºC < 0.0942 ºC < 0.1030 ºC. Water is more stable than Methanol and Glycol, with values of 0.0021 ºC < 0.0027 ºC < 0.0028 ºC. The time to stabilise Methanol is better than Water and Glycol. Methanol can be stabilised with ± 35 - 40 minutes, Water needs ± 38 - 40 minutes and Glycol needs ± 48 - 50 minutes. The relationship between uniformity and temperature stability is that the smaller the uniformity and stability values, the smaller the U95 of a calibration result. The U95 value of Methanol 0.11 ºC, Glycol 0.12 ºC and Water is 0.13 ºC.

Keywords


Uniformity, Stability, Uncertainty of Measurement (U95), Microbath 7102

Full Text:

PDF

References


Brown. (2005). Understanding and Expressing Measurement Uncertainties Associated with Thermodynamic Metrology. In Quality System Lab (pp. 1–4).

Deutscher Kalibrierdienst.(2004). Guideline DKD-R 5-7 Calibration of Climatic Chambers. www.dkd.eu

Fatwasauri, I., Erawati, S. T., Sasono, M., & Surakusumah, R. F. (2021). EVALUASI KETIDAKPASTIAN PENGUKURAN DALAM KALIBRASI TERMOMETER DIGITAL MENGGUNAKAN PERSAMAAN REGRESI KALIBRASI. Komunikasi Fisika Indonesia, 18(2), 131. https://doi.org/10.31258/jkfi.18.2.131-136

Fluke Coorporation. (2019). 7102 Micro-Bath User’s Guide.

Indrayani, L., & Sasono, M. (2017). Uji Homogenitas dan Stabilitas Suhu Mini Liquid Bath untuk Kalibrasi Termometer Digital Makanan. Prosiding SNFA (Seminar Nasional Fisika Dan Aplikasinya), 1–13.

ISO/IEC 17025. (2017). General requirements for the competence of testing and calibration laboratories (Third).

JCGM 100. (2008). Evaluation of measurement data-Guide to the expression of uncertainty in measurement. www.bipm.org

J. Drnovs’ek. (1997). A General Procedure for Evaluation of Calibration Baths in Precision Temperature Measurements. IEEE Instrumentation and Measurement Technology Conference, 19–21. https://doi.org/0-7803-3312 -8/9

J. V. Nicholas & D. R. White. (1994). Traceable Temperatures: An Introduction to Temperature Measurement and Calibration. John Willey & Sons.

Kaatze, U. (2007). Reference liquids for the calibration of dielectric sensors and measurement instruments. Measurement Science and Technology, 18(4), 967–976. https://doi.org/10.1088/0957-0233/18/4/002

Komite Akreditasi Nasional. (2019). Pedoman Kalibrasi Enklosur Suhu. http://www.bsn.or.id

Mikko Tervala. (2020). Portable Field Temperature Calibration System. Metropolia University of Applied Sciences.

Nely Ana Mufarida. (2019). Perpindahan Panas1 : Konsep dan Penerapannya. CV Pustaka Badi.

Thai Laboratory Accreditation Scheme. (2008). Publication Reference G-20 Guidelines for Calibration and Checks of Temperature Controlled Enclosures.

WMO. (2021). Guide to Instruments and Methods of Observationorological Instruments and Methods of Observation. World Meteorological Organization (2021st ed.).

Y.P Singh. (2009). Basic Concepts in Temperature Metrology: Formulation and Importance of the International Temperature Scales. Global Sci-Tech., Al-Falah’s J. Sci. Technol, 4, 191–214.

Y.P. Singh, V. P. W. P. R. S. and Z. H. Z. (1991). Heat Pipe Extension Bath for Calibration of Long Stem Reference Thermometers Against the Standard Platinum Resistance Thermometer. Indian Journal of Pure & Applied Physics (IJPAP), 459–462.

Žužek, V., & Pušnik, I. (2017). Calibration of Air Thermometers in a Climatic Chamber and Liquid Baths. International Journal of Thermophysics, 38(7). https://doi.org/10.1007/s10765-017-2234-6




DOI: https://doi.org/10.33394/j-ps.v11i2.7842

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2023 Waslina Rangkuti, Kerista Tarigan, Syahrul Humaidi, Marhaposan Situmorang, Erna Frida, Yahya Darmawan

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons License
J-PS (Prisma Sains: Jurnal Pengkajian Ilmu dan Pembelajaran Matematika dan IPA IKIP Mataram) p-ISSN (print) 2338-4530, e-ISSN (online) 2540-7899 is licensed under a Creative Commons Attribution 4.0 International License.

View My Stats